Techniken Engineering Solutions

Our Services

TES is a very dynamic organization that has grown over the years from specialized Filtration and separation company and enhanced its core competency in delivering state-of-the-art packages to its clients across the world.

We closely work with our clients to form strategies and solutions for facility Development and Improvement in a cost-effective manner.

Industries we have served are as follows :-

Refineries
Oil And Gas
Petrochemicals
Power
Chemical
Fertilizers

Services we offers are as follows :-

Engineering services
- Basic Engineering :-
  - Process
  - Feed
Project Management :-
- Project Control
- Procurment Assistance

PROCESS AND FEED

The basic engineering services offered by TES consist of core documentation of projects,including process flow diagrams, heat & mass balances, piping and instrumentation diagrams (P&IDs), control & operational philosophy, basic equipment sizing, equipment specifications, conceptual equipment layout,etc.

TES BASIC ENGINEERING COVERS:

Process Simulation of process units Like Group Gathering Station, Early Production System and Gas processing Station, Well Testing Unit (Heat and mass balances, process flow-sheets)
Freezing the Master Layout of the Plant
Definition and sizing of main equipment resulting in process specifications.
Preliminary Piping and Instrument Diagrams
Schematic drawing of equipment on each floor
Preparation of P&ID's for utilities.
Sizing calculations
Hydraulic calculations.
Performing insulation and heat tracing calculations
Preparation of line list, equipment list, valve list, etc
Good Experience in Group Gathering Station Early Production System Gas Processing Unit Effluent Treatment Plant and Many other Process Packages.

Software Used :-

HYSYS
PROMAX
PIPNET

FRONT END ENGINEERING DESIGN (FEED)

TES's extensive experience facilitates the client to have a FEED that reflects all technical specific requirements and avoid any significant changes during execution of the same.

TES FEED PACKAGES COVERS

Basis of Design.
Feasibility Study.
Preparation of the specification.
Development of process and utility P&ID released for detail engineering.
Preparation of tender packages for the main equipment.
Development of detailed plot plans and hazardous areas.
Elaboration of the main piping, instrument, electrical and civil works layouts.
Carrying out all the studies to be performed before ordering the main

MECHANICAL

TES delivers design and detail engineering of static equipment and packages for oil and gas, refinery, petrochemical, chemical, offshore,power plant, utility. We have worked with static equipment including pressure vessels, shell and tube heat exchangers, towers, reac- tors, condensers, tanks and evaporators. Some services includes:

Mechanical design of static equipment like pressure vessels, column, stacks, heat ex-changers, reactors, storage tanks, spheres, bullets, silos, bins, surge tanks etc. as per relevant international codes standards.
Component level & local analysis.
FEA (Finite Element Analysis).
Various metallic and lined material combinations for the designed equipment.
Preparation of MDS (Mechanical Data Sheets), Specifications, GA (General Arrangement) & fabrication drawings.
Material requisition, technical evaluation of vendor offers and vendor drawing re-view.
Selection of right kind of equipment as per process data sheets and applicable codes & standards.
Preparation of MDS (Mechanical Data Sheets) & specifications.
Material requisition, technical evaluation of vendor offers and vendor drawing re-view.
Wide range of rotating equipment and their sub-types e.g. compressors, blowers, turbines, pumps, agitators, fans etc.

Software Used :-

PV Elite
Intergraph Tank
AMETank
HTRI

PIPING

TES offers design and detail engineering ser- vices for the oil and gas, refinery, petrochemical, chemical, offshore, power plant, utility, and pharmaceutical industries.

Piping material specifications.
3D model project set-up.
Painting and insulation specification.
Site survey / tie-in sketches.
Piping studies.
Updating plot plans and unit plot plans.
Updating key plans.
Equipment modeling.
Nozzle orientation drawings.
Modelling of lines.
Interface with other disciplines.
Stress analysis.
Pipe supports.
Clash checking.
Model reviews.
Isometrics.
Piping general arrangement drawings.
Piping material take-offs.
Support material take-off.
Insulation and painting take-off.

Software Used :-

PDMS
SP3D
CADWorx
CAESERII
AutoCAD.

CIVIL AND STRUCTURE

TES provides design calculations and detailed structural drawings, fabrication drawings, and bill of materials consistent with international standards.

Computer aided analysis, design & detailing of Heavy RCC & steel structures for industrial & commercial building.
Reinforced concrete framed structures
Pile and conventional foundations
Large diameter / size storage sheds.
Equipment and machinery foundations.
Concrete storage silos and large diameter storage tank foundations.
Retaining, dyke, and boundary walls.
Turbine houses and workshop buildings.
Cable and pipe trenches and tunnels.
Roads, pavement, grading plans, and drainage systems.
Gates, compound walls, and fencing.
Steel framed buildings and super-structures
Switch yards and transmission line towers.

Software Used :-

STAAD Pro
SACS

ELECTRICAL

TES provides design calculations and detailed drawings, for all electrical facility.

Load flow studies.
Selection of HV / LV switchgear, motor control centers.
Selection of AC / DC UPS.
Selection of power / distribution transformers.
Designing supply change over schemes for incomers and outgoing feeder control schemes.
Selection of feeder / motor / transformer protection relays.
Switchyard / transformer layouts.
Switchgear / MCC room layout .
Construction Scope of Work and responses to bidder's technical queries.
Battery room layouts.
Cable tray / trench layouts.
Earthing layouts.
Cable routing layouts.
Lighting (indoor / outdoor) layouts .
Lightning protection layouts .
Power and control cable schedules.
Interface activities with civil / machinery / instrumentation.
Coordination with civil for floor openings,electrical equipment foundation, and plants.
Standard installation drawings for power system, earthing system, lighting system and cable tray / ladders .
Review vendor bids and issue technical bid analysis.
Review vendor drawings and issue approvals for manufacturing.
Electrical data input for packaged equipment
Requisition / specifications for HV / LV switchgear, motor control centre, MV / LV motors, power / distribution transformers, lighting / small power distribution boards, AC / DC UPS, lighting fixtures, power / control cables, cable trays, earthing materials, etc.
Bill of quantities for bulk materials.
Standard installation drawings for power system, earthing system, lighting system and cable tray / ladders.
Review vendor drawings and issue approvals for manufacturing.

Software Used :-

ETAP
DIALUX

INSTRUMENTATION

TES provides design calculations and detailed drawings, for all electrical facility.

Preparation of control philosophy.
Preparation of detailed execution drawing.
Preparation of instrument index.
Preparation of instrument elevation plan.
Preparation of interlock logic diagrams.
Preparation of cable tray / cable trench layouts.
Preparation of FAT and SAT procedures.
Preparation of as -built drawings and documentation.
preparation of junction box termination drawings.
Preparation of instrument hook up drawings.
Preparation of cable schedules.
Preparation of fire and gas drawings.
Preparation of cause and effect drawings.
Preparation of requisition and specifications for instruments.
Technical bid evaluation.
Preparation of scope of work for construction activities.
Sizing of control valves, orifice plates, and relief valves.
Preparation of bill of materials.
Preparation of interface drawings for DCS,PLC, SCADA and MCC.
Attending SAFOP / HAZOP meetings.
Preparation of earthing layouts for system and field.
Review of vendor package systems.

Software Used :-

IN TOOLS

PROCUREMENT ASSISTANCE

Services being offered:-

Preparation of vendor evaluation, short listing and recommendation of vendors.
Preparation of enquiries for all packages, equipment's and machineries.
Floating enquiries, obtaining techno-commercial clarifications and preparation of comparative statement of offers.
Expediting and progress chase up with vendors and submission of periodical progress reports and management information.

AS BUILT SERVICES

Services being offered:-

As-built drafting is an important process of plant design engineering or any engineering project. As-built drawings and documentation are essentially the conclusive set of drawings created post the completion of an engineering project and include all the changes that were made to the original designs. These include modifications, field changes, design changes, extra work and every change that was approved and implemented during the construction and commissioning phase, as well as handwritten notes and sketches explaining the changes.
TES provides as-built documentation services across all disciplines including oil & gas, process, energy, utilities, construction and many others. Our as-built drawing services help create accurate documentation so that all the changes made during the construction phase of the plant are recorded and updated, as they happen. Our team can provide this service based on the client needs and the stage of the project.